Local Option 206 Sealed Crate Engine

Local Option 206 Discussion

we are seeing many racers prying off the cap lock during races (they keep it loose) and unscrewing their cap slightly during a race. Blatant …

Posted by FerDeLance in Animal/206 Engine Questions

Local Option 206

Hand-built in Milwaukee, WI. using tooling and dies specifically for racing for unparalleled repeatability.

Factory sealed short-block with ground cam and controlled piston pop-up (reducing compression variance)

Simplified IKF/WKA rule set designed to maintain a stock configuration right down to the factory shipped carburetor jets. This is NOT today’s standard Animal rule set.

Dual Ball-Bearing, RACING Reinforced Cylinder
Squeeze-Cast, T-7 Treated, Racing Rod
Ground Cam w/ Compression Release
High-Silicon Valve Springs
PVL™ Digital Ignition System
Racing Only Intake Port
Walbro™ Round - Slide Carburetor
Carbon Steel racing Crankshaft with Induction-Hardened Crankpin
Federal Mogul™ Cam Ground, Barrel-Faced Piston
Goetze performance piston ring set
Chrome-Faced top ring
Nitrited Dished Exhaust Valve
Automotive 3-Piece Valve Retainer System
Beefy Rocker Arm Stud Nuts

Model Number 124332 8201-01
Type 8201-01
Displacement 12.48 Cu. in. - 206 cc
Bore 2.6875/2.6885 in.
Compression Ratio 9 to 1
Factory Timing 29 degrees BTDC
Description Wrench / socket size Torque
Air Guard 7mm 40-50 lb-in. (4.5-5.6 Nm)
Blower Housing 10mm & 3/8" 60-110 lb-in. (7-12.5 Nm)
Carburetor (to manifold) 10mm 80-110 lb-in. (9-12.4 Nm)
Connecting Rod T27 115-120lb-in. (13 Nm)
Cylinder Head Bolts 10mm 200-220 lb-in. (20-27 Nm)
Exhaust Brace Screws 10mm 95-125 lb-in. (11-14 Nm)
Exhaust Stud 10mm 95-125 lb-in. (11-14 Nm)
Flywheel Nut 15/16" 55-75 ft-lbs. (74.5-101 Nm)
Flywheel Fan 10mm 180-240 lb-in. (20-27 Nm)
Intake (to cylinder) 5mm Allen 70-90 lb-in. (8-10.2 Nm)
Oil Drain Plug 3/8" 100-125 lb-in. (11-14 Nm)
PVL Module 7mm 20-35 lb-in. (2.3-4 Nm)
Rocker Arm Stud 7/16" 90-120 lb-in. (10-14 Nm)
Rocker Arm Plate 10mm 70-90 lb-in. (7.9-10.1 Nm)
Rocker Arm Set Screw 1/8" Allen 50-70 lb-in. (5.6-7.9 Nm)
Spark Plug 5/8" Deep 95-145 lb-in. (11-16.4 Nm)
Side Cover 10mm 140-170 lb-in. (16-19 Nm)
Starter Gear #2 Phillips 35-53 lb-in. (4-6 Nm)
Top Control Plate 10mm 70-90 lb-in. (8-10 Nm)
Valve Cover 10mm Lower & 3/8" 30-60 lb-in. (3.5-7 Nm)