Animal

Animal Racing Engine Discussion

Is the ARC Mongrel clutch legal for L206 or would it be considered a modified Max-Torque. It's for the L206 Masters or Heavy.Ben

Posted by benn in Animal/206 Engine Questions

Animal Racing Engine

Performance by Design. Briggs & Stratton Racing took the latest approaches in engineering, manufacturing, and testing to design for its dedicated racing engine from the ground up. One of the most popular Briggs racing engines, the Animal engine will help you compete in your next snocross or kart race.

Each Animal racing engine by Briggs & Stratton is hand-built by master small engine technicians and tested in our skunk-works in Milwaukee, Wisconsin.

Dual Ball-Bearing, RACING Reinforced Cylinder
Squeeze-Cast, T-7 Treated, Racing Rod
Ground Cam w/ Compression Release
High-Silicon Valve Springs
PVL™ Digital Ignition System
Racing Only Intake Port
Walbro™ Round - Slide Carburetor
Dana™ Fire-Ring Head Gasket
Racing Crankshaft w/ Induction-Hardened Crankpin
Federal Mogul™ Cam Ground, Barrel-Faced Piston
Chrome-Faced, Racing Only Ring Package
Nitrited Dished Exhaust Valve
Automotive 3-Piece Valve Retainer System
Beefy Rocker Arm Stud Nuts

Model Number 124332
Type 8003-01
Displacement 206
Bore 2.6875/2.6885
Stroke 2.2
Compression Ratio 8.5 to 1
Factory Timing 29 degrees BTDC
Description Wrench / socket size Torque
Air Guard 7mm 40-50 lb-in. (4.5-5.6 Nm)
Blower Housing 10mm & 3/8" 60-110 lb-in. (7-12.5 Nm)
Carburetor (to manifold) 10mm 80-110 lb-in. (9-12.4 Nm)
Connecting Rod T27 115-120lb-in. (13 Nm)
Cylinder Head Bolts 10mm 200-220 lb-in. (20-27 Nm)
Exhaust Brace Screws 10mm 95-125 lb-in. (11-14 Nm)
Exhaust Stud 10mm 95-125 lb-in. (11-14 Nm)
Flywheel Nut 15/16" 55-75 ft-lbs. (74.5-101 Nm)
Flywheel Fan 10mm 180-240 lb-in. (20-27 Nm)
Intake (to cylinder) 5mm Allen 70-90 lb-in. (8-10.2 Nm)
Oil Drain Plug 3/8" 100-125 lb-in. (11-14 Nm)
PVL Module 7mm 20-35 lb-in. (2.3-4 Nm)
Rocker Arm Stud 7/16" 90-120 lb-in. (10-14 Nm)
Rocker Arm Plate 10mm 70-90 lb-in. (7.9-10.1 Nm)
Rocker Arm Set Screw 1/8" Allen 50-70 lb-in. (5.6-7.9 Nm)
Spark Plug 5/8" Deep 95-145 lb-in. (11-16.4 Nm)
Side Cover 10mm (Before 7/15/15- ‘MT 9.8 grade’)-185-220 lb-in. (21-24 Nm)
(After 7/15/15-10.9 grade with integrated fasteners)-250-270 lb-in. (28-30 Nm)
Starter Gear #2 Phillips 35-53 lb-in. (4-6 Nm)
Top Control Plate 10mm 70-90 lb-in. (8-10 Nm)
Valve Cover 10mm Lower & 3/8" 30-60 lb-in. (3.5-7 Nm)